Sand Washing Machine Spiral Sand Washing Machine Sand Cleaning
Equipment
Equipment parameters
As an indispensable equipment in sand washing operations, spiral
sand washing machine is often used in sand washing operations such
as gravel factories, glass factories, quartz sand, machine-made
sand concrete dam construction sites, etc. The spiral sand washing
machine can perform desliming, dehydration and classification work.
The model of this spiral sand washing machine is XCLX750-1. The
diameter of the spiral body is 750 mm, the length of the water tank
is 7500 mm, and the sand washing throughput per hour is 40-70 tons.
The spiral speed of this spiral sand washing machine is 27
revolutions per minute, the operation speed is low, and the
operation is relatively stable. The maximum feeding particle size
of this spiral sand washing machine is below 10 mm, and the water
consumption per hour is 8-65 tons. Because this type of spiral sand
washing machine is a single screw, it only needs one motor to drive
the operation. This motor is an AC motor with a power of 7.5
kilowatts. The weight of this spiral sand washing machine is 4.6
tons.
Parameter table
| Model | XCLX750-1 |
| Spiral diameter | 750mm |
| Sink length | 7500mm |
| Spiral speed | 27r/min |
| Maximum feed particle size | 10mm |
| Production capacity | 40-70t/h |
| Water Consumption | 8-65t/h |
| Power | 7.5kW |
| Weight | 4.6t |
Cleaning effect
The cleaning effectiveness of a spiral sand washing machine depends
on several factors, including the design and operating parameters
of the machine, as well as the type and quality of the raw
materials processed. However, in general, the spiral sand washing
machine has the following advantages, allowing it to provide good
cleaning results:
· Thorough cleaning: The spiral structure and water jet system of
the spiral sand washing machine enable it to clean the gravel
comprehensively and thoroughly. The rotation and pushing action of
the spiral helps separate impurities and soil from the gravel,
while the water jets further flush and wash away impurities.
· Efficient separation: The spiral sand washing machine can
effectively separate gravel particles of different sizes. Its
helical structure and rotation speed are designed so that the
larger grains of gravel can be quickly settled and discharged,
while the smaller grains of gravel can be effectively washed and
collected.
· Protect fine sand: The spiral sand washing machine is very gentle
in processing fine sand. It separates and cleans fine sand through
the action of rotation and water flow, avoiding excessive wear and
damage to fine sand.
· Adjustable parameters: Spiral sand washing machines usually have
adjustable working parameters, such as the rotation speed of the
spiral, water flow rate and feed concentration. By adjusting these
parameters, the cleaning effect can be optimized according to
actual needs to meet different raw material and product
requirements.
It should be noted that the cleaning effect of the spiral sand
washing machine is also affected by the characteristics and quality
of the raw materials. Some special raw materials may contain sticky
substances or special impurities that are difficult to clean, which
may have a certain impact on the cleaning effect. Therefore, when
using a spiral sand washing machine, it is necessary to select
appropriate operating parameters and cleaning solutions according
to the specific situation to achieve the best cleaning effect.
Factory information
