Good Mud Removal Effect Roller Screening Machine 8 Motors But Low
Energy Consumption
Background of The Device
In the mining industry, crushed rocks and stones are an essential
and critical part of the process. Whether it is a small-scale mine
or a large mining operation, the crushing process is unavoidable.
However, the process generates an enormous amount of waste
material, commonly known as tailings, that needs to be sorted and
separated from the valuable mineral ores. The sorting process can
be an expensive and manual process, which is why many mining
companies are turning towards the Roller Screening Machine to
automate this process.
Advantages of The Device
1. Reduce labor costs. The technology reduces the need for manual
labor, eliminating the risk of human error and reducing labor
costs.
2. Improve work efficiency. The Roller Screening Machine can sort a
high volume of material quickly and efficiently, increasing the
productivity of the mining operation.
3. Reduce waste tailings. The machine separates the valuable ores
from the waste material, reducing the amount of discarded rock and
tailings. This reduction translates into a reduced impact on the
environment and lowering the cost of tailing management.
4. Increase production and income. The machines help increase the
mining operation's profitability by converting waste rock into ore
that can be sold. The technology can also be used to recover
valuable minerals that were previously lost in the tailings,
increasing the yield of the mine operation.
Technical Reference Data
| Model | Roll surface width (mm) | Number of axes | Throughput (t/h) | Feed side length (mm) | Roll shaft clearance (mm) | Screening efficiency (%) | Installed power | Flap drive push rod (optional for for electro hydraulic users) |
| Power (kw) | Number | Model | Thrust (kgf) | Power (w) |
| XCDRS1008 | 1000 | 8 | 140-385 | ≤500 | 25-100 | 80 | 2-4 | 8 | DT or DTY | 300 | 370 |
| XCDRS1010 | 10 | 168-490 | 85 | 3-3.5 | 10 |
| XCDRS1012 | 12 | 210-595 | 90 | 12 |
| XCDRS1408 | 1400 | 8 | 294-700 | ≤700 | 35-120 | 80 | 8 | DT or DTY | 500 | 750 |
| XCDRS1410 | 10 | 364-896 | 85 | 3-7.5 | 10 |
| XCDRS1412 | 12 | 455-1050 | 90 | 12 |
Model Analysis
Finished Processing Materials
Our Service
Our services span the entire life cycle of the equipment, from
consulting and proposal to production increase and retrofit. We
provide advice and support to our customers worldwide. What our
customers need is what we serve.
